About Us Products Feedback Contact Us Site Map Home
Products> One Touch, Instant Time Saving Tube Fittings
 

Features | Applications | Instruction for use
 
  • Fuel lines for petrol or diesel fuel in Automobile and Transport Industry.
  • Compressed air lines on pneumatic control systems.
  • Automotive gasoline lines.
  • Automotive hydraulic lines.
  • High pressure lubricating oil lines in Engineering and Automobile Industry.
  • Lubes and air lines on textile machinery.
  • Agricultural spray equipment for insecticides and fertilizers.
  • Transporting lines for alimentary liquids such as milk and beer and biological liquids such as blood, serum etc.
  • Refrigeration lines.
  • Ducts in air conditioning systems.
  • In the chemical industries for conveying hydrocarbons, esters, ketones etc.
  • Centralised lubrication systems.

 
  1. "ONE TOUCH" Connecting or Disconnecting
    Push a tubing in fully to the tube end for a perfect instantaneous connection.
    No tool is necessary for disconnecting. Press the releasing bush in by fingers while pulling the tubing out for a simple disconnecting work.
    No wrench is required to connect and disconnect the tubing and therefore the interval between joints can be made smaller.
  2. Male stud with Pipe Thread Swivels
    The directions of the tubing can be easily changed according to its requirement after installation.
    The joint can be screwed in only by the threaded part so that it does not interfere with the neighbouring objects, thus allowing the interval between joints to be smaller.
  3. Maximum Air Flow Capacity
    Sealing for tube connection is maintained perfectly on the outside surface of the tube, so that the inside diameter of the tube allows a maximum capacity flow.
  4. No loss of Inside Parts
    Every part inside the joints is completely fixed, thus no loss of inside parts such as sleeves and nuts.
  5. Working Pressure Range
    0-20 bar
  6. Operating Temperature Range
    -400C to 1300C
 

AVAILABLE FOR :
4 mm, 6 mm, 6.35 mm, 8 mm, 10 mm, 12 mm, 14 mm OD NYLON / Pu Tubings.

PIPE THREADS AVAILABLE :
M5, 1/8", 1/4", 3/8", 1/2" BSP, NPT & BSPT.

Instant Tube Fittings with Non-Return Valve
MS 4-01 NRV MS 10-02 NRV
MS 4-02 NRV MS 10-03 NRV
MS 6-01 NRV MS 10-04 NRV
MS 6-02 NRV MS 12-02 NRV
MS 6-03 NRV MS 12-03 NRV
MS 8-01 NRV MS 12-04 NRV
MS 8-02 NRV MS 14-02 NRV
MS 8-03 NRV MS 14-03 NRV
  MS 14-04 NRV

 

1. Recommended tubing

  • Nylon tubing and polyurethane tubing are most compatible for HASOLON Instant Fittings.
  • Tolerance + 0.1 mm is allowed for externa; diameter of tube and ellipticity of within 0.2 mm
    (between longer and shorter diameter) is allowed for the tube.
  • The surface of tubing should not be damaged as a matter of course.
  • The tubing should be cut by "tube cutter"


2. Disconnecting
Push the tubing slightly and the releasing bush by fingers with even pressure and then pull the tubing out for disconnecting.

 

3. Connecting Tube
Thrust a tubing in fully to the tube end. Do not bend the tubing excessively near the fitting.

 

click here for more

Office : A-20, Sarvonnati Society, Hansoti Road, Cama lane, Ghatkopar (W), Mumbai - 400086.
Tel. : +91 22 25149190, 25116469, Fax. : +91 22 25111173, Mobile : +91 9820023817 (Mr. Yogesh Shah)
Email : yogdeep@vsnl.com, yogdeep1978@yahoo.co.in, yogdeep_enterprise@hotmail.com